How to make bamboo cutting board

A table of safe and delicious dishes can not be separated from a satisfactory and safe cutting board. After analyzing various materials of cutting boards, experts found that although different cutting boards have advantages and disadvantages, the use of bamboo cutting boards is safer.

This article will answer the question of how to make bamboo cutting board

Bamboo cutting board is now divided into the whole bamboo process and the bamboo cutting board.
The bamboo splicing process is made of bamboo strips with an appropriate amount of glue under high temperature softening. The whole bamboo process is that the bamboo (section), which is originally cylindrical, is softened and flattened into a whole seamless bamboo board, and 2 seamless flat bamboo boards are glued and pressed. The cutting board made of the whole bamboo process will not be in direct contact with the adhesive during normal use.

1.the original bamboo processing into bamboo slices, and remove the bamboo segments;

2.Cut the bamboo pieces into equal length segments;

3.The bamboo segments are bundled into a cylindrical bamboo bundle, and the bamboo slices in the bundle are arranged vertically in the direction of the fiber;

4.Put the bamboo flake phase into the kettle, flood the bamboo flake bundle with food wax solution, and cook it at atmospheric pressure for 1.5 ~ 7.5 hours; The temperature of wax juice in the kettle is 160 ~ 180℃. The moisture content of bamboo segments is 3% ~ 8% when wax boiling is finished;

5.Take the bamboo bale out of the liquid and squeeze it when it is not cold. During the extrusion process, the bamboo bale is pressed into the cone mold with a round table inside and the open mold with a cylindrical inside. During the pressing process, the bamboo bale enters the large-diameter end of the cone mold axially and then enters the open mold through the narrow end of the cone mold. The inner diameter of the rough end of the conical die is the same as that of the open die; Before pressing into the bamboo sheet bundle, a fastening ring is inserted around the inner cavity of the openable mold in advance, and the bamboo sheet bundle is pressed into the openable mold after being extruded by the conical mold, that is, the bamboo sheet bundle is naturally inserted into the tight group ring to form a product tightly combined between bamboo sheets and tightened by the fastening ring;

6.Open the mold and take out the above products.

If you need a cost-effective cutting board, please contact us.